|
|
ALTurbine GenPack Module
The GenPack is the latest addition to our best selling educational wind turbine the ALTurbine.
Price from: $29
 
|
|
|
Wind Turbine Generator
A basic generator for your wind turbine. This generator attaches to the 12 hole crimping hub, and fits inside a 1" PVC coupler.
Price: $4.25 | SKU: KWM001B
|
|
|
12 Hole Crimping Hub
This hub attaches to our wind turbine generator. It can hold up to 12 1/4" dowels. You design your own blades to attach to the dowels, and then construct your own tower and base. Instructions on building a wind turbine are included.
Price: $6.50 | SKU: KWM002A
|
|
|
1/4" Dowels
Attach these dowels to our 12 Hole Crimping Hub. Then you design your own blades, and construct a wind turbine tower and base. Instructions for building a complete turbine are included.
Price from: $2.50
|
|
|
12 Hole Parts Deal
This deal offers the 12 Hole crimping hub, a wind turbine generator, and dowels all in one package! Instructions for building a complete wind turbine are included.
Price from: $11.50
|
|
|
Gears & Motors
Build a more advanced turbine with these motors, gears, and holders.
Price: $26 | SKU: KWM005A
|
|
|
|
|
Cord Extension
100 feet of red and black 22-gauge cord.
Price: $30 | SKU: KWM045D
|
|
|
Wire Strippers
Removes insulation without damaging wire.
Price: $8 | SKU: KWM028A
|
|
|
|
Water Pump
Demonstrate turbine power with this water pump. This mini water pump is suitable for a wide range of projects, from wind turbines, to solar power applications to automatic watering systems to homemade jet boats.
Price from: $10
|
|
|
Digital Multimeter
This multimeter attaches to a wind turbine or other small device that produces electricity. It records voltage and amperage.
Price: $12.50 | SKU: KWM009A
|
|
|
Visual Voltmeter
SEE the voltage output of your wind turbine in with this LED visual voltmeter. Attach this voltmeter to a wind turbine, solar panel, or other 1-10 volt electrical device. This meter only records voltage.
Price: $17.50 | SKU: KWM010A
|
|
|
Dr. Fuel Cell Measurement Load Box
A great and multi-featured measurement box. It contains a voltmeter and ammeter, 2 electrical loads (lamp and electric motor) and 7 different adjustable resistance values for characteristic curve analysis.
Price: $90 | SKU: KWM016A
|
|
|
|
|
Power Output Board
Attach this power output board to a wind turbine or solar panel and see if you can generate enough power to play music or light an LED bulb.
Price: $7.50 | SKU: KWM011A
|
|
|
Power Output Pack
These load devices come with many of our full kits. Attach them to a wind turbine or solar panel and see if you can power them.
Price: $16 | SKU: KWM029A
|
|
|
LED Bulbs
LED bulbs are great to attach to a wind turbine or solar panel. Hook them up to a circuit, and see if you can generate enough power to light them up.
Price: $1.50 | SKU: KWM014A
|
|
|
|
Balsa Wood Blades
Balsa is great for making wind turbine blades. Attach them to our 1/4" dowels, attach those to a 12 hole crimping hub and wind turbine generator, then build a tower and base. Instructions for building a complete wind turbine are included.
Price from: $10
|
|
|
Plastic Cardboard Blades
A light, stiff, and easy-to-cut blade material. Plastic cardboard is stronger than balsa. Attach these blades to our 1/4" dowels, attach those to a 12 hole crimping hub and wind turbine generator, then build a tower and base. Instructions for building a complete wind turbine are included.
Price from: $7
|
|
|
Wind Turbine Blades
These 8" diameter wind turbine blades fit on any DC generator or motor with a 2mm driveshaft.
Price: $8 | SKU: KWM061A
|
|
|
|
Wood Tower
This wood tower is great for building a wind turbine. A 1" PVC 90 degree fitting will fit on the top of the tower. Instructions on how to build a complete wind turbine are included.
Price: $10.50 | SKU: KWM018A
|
|
|
Yawing Add-on Tower
This add on to the ALTurbine, Basic Turbine, or Geared Turbine kits allows you to adapt your wind turbine so it will yaw (rotate) into the wind. If you are planning to take your device outside and do some testing, you’ll want to get this add-on. Instructions are included.
Price: $15 | SKU: KWM017A
|
|
|
|
ALTurbine Driveshafts
Extra steel driveshafts for the ALTurbine. These driveshafts will supplement the ALTurbine. You can also use them to build a wind turbine from scratch.
Price from: $3.50
|
|
|
Gears & ALTurbine Mount
Gears and generator mount for the ALTurbine head. These will supplement the ALTurbine. You can also use them to build a wind turbine from scratch.
Price: $12 | SKU: KWM015B
|
|
|
Wind Turbine Gears
Extra gears for wind turbine or other projects. These will supplement the ALTurbine. You can also use them to build a wind turbine from scratch.
Price: $7 | SKU: KWM015N
|
|
